To Next Page

To Previous Page

9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service

Manual

10.19

ENGINE SERVICE PANEL

Lift the panel upward and towards the front of the vehicle

to remove the panel

HOOD REMOVAL

1. To remove the hood, turn both 1/4 turn latches

disengage the rear portion of the hood.

2. Lift rear of hood and slide forward to disengage the

front tabs and remove the hood from the vehicle.

UPPER DASH REMOVAL

1. Remove the hood as previously described.

2. Remove the two T-40 Torx screws retaining the

Upper Dash cover between the front fenders

3. Disconnect the instrument cluster, AWD switch,

headlight switch, and ignition switch. Note their

location and wire routing. Remove the upper dash.

LOWER DASH REMOVAL

1. Remove the Upper Dash (see Chapter 10 – Upper

Dash Removal, page 10.19

2. Remove the two T-40 Torx screws retaining the dash

and the one T-40 retaining the back of the dash to the

bracket.

3. Remove the dash assembly from the vehicle.

NOTE

The lower dash is also held by clips. Pull the dash

straight out to disengage the clips..

BODY / FRAME

Polaris RZR 900 2016 Service Manual

Questions and Answers: