Rigol DS4024 User Manual

RIGOL Chapter 6 Operations and Measurements
6-32 MSO4000/DS4000 User’s Guide
To Clear the Measurement Results
The oscilloscope allows users to clear or recover the measurement results of one-key
measurement. If you have currently enabled one or more items of the 29
measurement parameters, you can clear or recover the measurement results of at
most 5 measurement items that are enabled lastly.
Note: The 5 measurement items that are enabled lastly are determined according to
the order in which you enabled them and they will not change as you delete one or
more measurement items.
Press Measure  Clear to open the clear measurement menu. In this menu,
 Press Item n (n= 1 to 5) to delete or recover the specified measurement item.
When one measurement item is deleted or recovered, the measurement results
of the other measurement items at the bottom of the screen will move one-item
left or right (if there are still other measured items).
 Press All Items to delete or recover the measurement results of at most 5
measurement items that are enabled lastly at the same time.
Note: Pressing and holding Measure can quickly clear or recover the measurement
results of at most 5 measurement items that are enabled lastly.
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30

Rigol DS4024 Specifications

General

Brand	Rigol
Model	DS4024
Category	Test Equipment
Language	English