Rockwell Automation Publication 2080-UM002L-EN-E - November 2021 9
Preface
About This Publication
Use this manual if you are responsible for designing, installing, programming,
or troubleshooting control systems that use Micro800â„¢ controllers.
You should have a basic understanding of electrical circuitry and familiarity
with relay logic. If you do not, obtain the proper training before using this
product.
This manual is a reference guide for Micro800 controllers, plug-in modules,
and accessories. It describes the procedures you use to install, wire, and
troubleshoot your controller. This manual:
• Explains how to install and wire your controllers
• Gives you an overview of the Micro800 controller system
See the Online Help provided with Connected Components Workbenchâ„¢
software for more information on programming your Micro800 controller.
Rockwell Automation recognizes that some of the terms that are currently
used in our industry and in this publication are not in alignment with the
movement toward inclusive language in technology. We are proactively
collaborating with industry peers to find alternatives to such terms and
making changes to our products and content. Please excuse the use of such
terms in our content while we implement these changes.
Conformal Coated Catalogs
Catalog numbers with the suffix ‘K’ are conformal coated and their
specifications are the same as non-conformal coated catalogs.
Download Firmware, AOP,
EDS, and Other Files
Download firmware, associated files (such as AOP, EDS, and DTM), and access
product release notes from the Product Compatibility and Download Center at
rok.auto/pcdc
.
Summary of Changes
This publication contains the following new or updated information. This list
includes substantive updates only and is not intended to reflect all changes.
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
Topic Page
Updated template Throughout
Added inclusive language acknowledgment 9
Corrected hardware feature introduction 13, 14
Removed certification information 30
Corrected the Low Preset (HSCAPP.LPSetting) description 131
To Next Page
Loading...
Need help?
General
