3. Press PAGE[<] [>] several times to select
“CARD,” and press [ENTER].
4. Press PAGE [<] [>] several times to select
“FORMAT,” and press [ENTER].
The formatting page will appear.
fig.12-4 (#MC fig.2-36)
5. Press [ENTER].
The following display will appear, and the Format
operation will be carried out.
fig.0-5
6. When formatting ends, the following dis-
play will appear.
fig.12-6 (#MC fig.14-4)
To exit the formatting page, press [UTILITY].
Saving All Internal Settings
to a Card (User Backup)
All internal data (user patches, user patterns, user
songs, user pattern sets, user RPS sets etc.) and system
settings can be saved as a whole to a memory card.
This data is collectively known as a “backup file.”
Each memory card can contain one such backup file.
* In order to create a backup file, there must be at least 1030
KB of remaining card memory. If you attempt to make a
user backup when there is less than 1030 KB of remaining
memory in the card, the following message will appear. If
this happens, initialized unneeded patterns to increase the
free card memory to 1030 KB or more.
fig.12-7 (#MC fig.14-4-1)
If you wish to verify the amount of remaining
card memory...
☞ “Checking the Remaining Amount of
Memory (Memory Information)” (p. 137)
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If from the beginning you wish to reserve memory for
creating a backup file, you can perform the User
Backup operation to create a backup file immediately
after formatting the card.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
1. Make sure that a memory card is inserted
into the memory card slot.
2. Press [UTILITY].
The indicator will light.
3. Press PAGE [<] [>] several times to select
“CARD,” and press [ENTER].
4. Press PAGE [<] [>] several times to select
“USER BACKUP,” and press [ENTER].
The User Backup page will appear.
fig.12-8 (#MC fig.14-5)
5. Press [ENTER].
The following display will appear, and the User
Backup operation will be carried out.
fig.0-5 (#MC fig.2-36)
6. When User Backup has been completed,
the following display will appear.
fig.12-10 (#MC fig.14-7)
If you wish to exit the User Backup page, press [UTIL-
ITY].
* If you perform a User Backup operation on a card that
already contains a backup file, the contents of the previous
backup file will be lost.
* User patches or user patterns which have been saved on a
card by the User Backup operation cannot be recalled as a
card group.
Chapter 12. Using Memory Cards
160
12
To Next Page
Loading...
Need help?
General
