Patch Parameters
#: Parameters which can also be operated from the front-panel knobs or buttons.
COMMON parameters [EDIT] -> NUMBER [1] (COMMON) (p. 77)
SOLO: Solo SW * Solo Switch OFF, ON
SOLO: Solo Legato * Solo Legato Switch OFF, ON
PORTAMENTO: SW #* Portamanto Switch OFF, ON
PORTAMENTO: Mode * Portamanto Mode NORMAL, LEGATO
PORTAMENTO: Type * Portamanto Type RATE, TIME
PORTAMENTO: Start * Portamanto Start Pitch PITCH, NOTE
PORTAMENTO: Time #* Portamanto Time 0–127
COM: Struct 1&2 * Structure Type 1&2 1–10
COM: Struct 3&4 * Structure Type 3&4 1–10
COM: Booster 1&2 * Booster Gain 1&2 0, +6, +12, +18
COM: Booster 3&4 * Booster Gain 1&2 0, +6, +12, +18
COM: Stretch Tune * Stretch Tune Depth OFF, 1–3
COM: V-Priority * Voice Priority LAST, LOUDEST
COM: Key Range L Key Range Lower C-1–UPR
COM: Key Range U Key Range Upper LWR–G9
COM: Velo Range * Velocity Range Switch OFF, ON
COM: Velo Range L Velocity Range Lower 1–UPR
COM: Velo Range U Velocity Range Upper LWR–127
COM: Velo X-Fade Velocity Crossfade 0–127
*: Common settings for each tone
WAVE parameters [EDIT] -> NUMBER [2] (WAVE) (p. 56)
WAVE: Tone SW # Tone Switch OFF, ON
WAVE: Wave Select Wave Select A001–C131
WAVE: Wave Gain Wave Gain -6, 0, +6, +12
FXM: FXM SW FXM Switch OFF, ON
FXM: FXM Color FXMColor 1–4
FXM: FXM Depth FXMDepth 1–16
PITCH parameters [EDIT] -> NUMBER [3] (PITCH) (p. 57)
PITCH: CoarseTune # Coarse Tune -48–+48
PITCH: Fine Tune # Fine Tune -50–+50
PITCH: Rnd Pitch Random Pitch Depth 1*
PITCH: Key Follow Pitch Key Follow 2*
P-ENV: Env Depth # Envelope Depth -12–+12
P-ENV: Velo Sens Velocity Sens -100–+150
P-ENV: Velo Time1 Velocity Time1 Sens 3*
P-ENV: Velo Time4 Velocity Time4 Sens 3*
P-ENV: Time KF Time Key Follow 3*
P-ENV: [A]Time1 # Time1 (Attack Time) 0–127
P-ENV: Time2 Time2 0–127
P-ENV: [D]Time3 # Time3 (Decay Time) 0–127
P-ENV: [R]Time4 # Time4 (Release Time) 0–127
P-ENV: Level1 Level1 -63–+63
P-ENV: Level2 Level2 -63–+63
P-ENV: [S]Level3 # Level3 (Sustain Level) -63–+63
P-ENV: Level4 Level4 -63–+63
1*: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200
2*: -100, -70, -50, -30, -10, 0, +10, +20, +30, +40, +50, +70, +100, +120, +150, +200
3*: -100, -70, -50, -40, -30, -20, -10, 0, +10, +20, +30, +40, +50, +70, +100
Parameter List
223
To Next Page
Loading...
Need help?
General
