36
Basic operation
Basic operation
fig.ScrGuide.eps
Screen operations
About the screen display
1
2
3
4
Top display area
fig.ScrTBScrDisp.eps
This area is always shown in the upper part of the screen.
Screen name
This shows the name of the screen currently shown in the
main display area.
The background color of the Screen name will change
depending on the channel layer selected:
Channel indicator
This indicates the currently selected channel’s number,
name, and port name.
A port name such as “A: IN 1” blinks when the corresponding
input/output unit is not connected correctly, or a non existent
port is patched to the channel.
REAC indications
These indicate the status of the REAC A/B:
Date&time indication
This shows the current date and time.
User setting indication
This shows the current user settings.
Scene indication
This shows the number and name of the currently selected
scene.
Main display area
fig.ScrMainArea.eps
Most screen operations are performed in this area. The name of
the current screen is shown in the screen name indication of the
top display area. You can use the cursor and function buttons to
perform operations in this area.
Layer
Color
CH 1–24
Yellow
CH 25–48 Orange
AUX/MTX Blue
USER Layer 1 Yellow with red line
USER Layer 2 Orange with red line
USER Layer 3 Blue with red line
1
1 2 3 4 5 6
1
2
Display
Description
Unlighted
No REAC device connected
Flashing Establishing connection with REAC device.
Lighted Normal connection with REAC device
3
3
5
6
2
M-480_e.book 36 ページ ２０１１年３月２日 水曜日 午前９時２０分
To Next Page
Loading...
Need help?
General
