84
AUX send/MTX send
AUX send/MTX send
AUX/MTX send operations (CH1–48, RTN1–6)
The AUX/MTX sends are used to send audio signals from input
channels to AUX1–16 and MTX1–8.
fig.InBlkSends.eps
The AUX (MTX) SENDS popup is used to perform AUX/MTX send
operations.
The CH-MUTE OPTION determines whether AUX/MTX sends are
muted when the channel is muted (p. 156).
1.
In the fader module section, press a [SEL] button to select
the desired channel.
2.
In the AUX/MTX SENDS area of the CHANNEL EDIT
section, press [DISP].
fig.PopAuxSends_Guide.eps
The AUX (MTX) SENDS popup will appear.
3.
Use the [F7 ( MTX SENDS)] or [F7 ( AUX SENDS)] to
switch to the MTX SENDS popup or the AUX SENDS
popup.
In the AUX SENDS popup, you can use the [F1 (SENDS 1–8)],
or [F2 (SENDS 9–16)] tab to switch two display pages.
AUX sends 1–16, MTX sends 1–8
These adjust the sends from the channel to AUX/MTX.
fig.PopAuxSendFieldGuide.eps
Number/Name
This indicates the AUX/MTX number and name.
Send level bar
This adjusts the send level to AUX/MTX in a range of -Inf dB–
+10.0 dB. The color of the send level bar indicates the send
point or the status of the send switch, as follows:
ON button
This turns the send switch on/off.
Send point select buttons
These select the point from which the channel signal is sent
to AUX/MTX, from the following choices:
LINK switch
This turns the AUX/MTX stereo-link on/off.
If AUX/MTX is stereo-linked, the following parameters will be
shown for the odd-numbered AUX/MTX send:
fig.PopAuxSendField2Guide.eps
Pan slider
This adjusts the send pan in a range of L63–R63.
PAN LINK button
This turns the PAN LINK switch on/off. If PAN LINK is on, the
pan from the channel to MAIN will be linked with the pan
from the channel to the stereo-linked AUX/MTX.
The function buttons have the following operations:
AUX (MTX) SENDS popup
CH 1-48
RTN 1L-6R
PRE FADER
PRE FADERPRE EQ
POST FADER
POST FADER
MUTE
SW
TO
1, 3...15
TO
2, 4...16
LEVEL
AUX/ MTX
LINK
PA N
PRE EQ
PRE EQ
PRE FADER
POST FADER
SWLEVEL
MUTE
OPTION
AUX SEND 1–16, MTX SEND 1–8
PRE FADER
POST FADER
POST FADER
MUTE
SW
TO
1, 3...15
TO
2, 4...16
LEVEL
AUX/ MTX
LINK
PA N
PRE FADER
PRE FADER
POST FADER
SWLEVEL
MUTE
OPTION
AUX SEND 1–16, MTX SEND 1–8
1
1
Blue
PRE EQ or PRE FADER send point
Green POST FADER send point
Gray Send switch is off
PRE EQ Send from the pre-EQ point.
PRE FD Send from the pre-fader point.
POST FD Send from the post-fader point
[F1 (SENDS 1–8)]* Displays the sends to AUX1–8.
[F2 (SENDS 9–16)]* Displays the sends to AUX 9–16.
[F3 (ALL ON) Turns on all send switches for each send field.
[F4 (ALL OFF) Turns off all send switches for each send field.
[F5 (UNITY) Sets the send level to 0.0 dB for the send field at
the cursor location.
1 2 3 4 5
1
2
3
4
5
6
7
6
7
M-480_e.book 84 ページ ２０１１年３月２日 水曜日 午前９時２０分
To Next Page
Loading...
Need help?
General
