86
Input/output patchbay
Input/output patchbay
When the M-480 is in its default state, the input patchbay is set as follows:
You can also use the EFFECTS screen to patch an effect output to a channel. For details, refer to “Using an effect via send/return” (p. 100).
You can also use the RECORDER screen to patch a USB memory recorder output to a channel. For details, refer to “Specifying the output-
destination for the USB memory recorder” (p. 130).
When the M-480 is in its default state, the output patchbay is set as follows:
Default setting of the input/output patchbay
Default settings of the input patchbay
Input channel
Input port
CH1–16
REAC A IN1–16
CH17–32 REAC B IN1–16
CH33–40 CONSOLE IN1–8
CH41–42 FX5 OUT L, R
CH43–44 FX6 OUT L, R
CH45–46 PLAY L, R
CH47–48 STEREO IN L, R
RTN1L–6R none
Default settings of the output patchbay
Output port
Output
REAC A
or
REAC B
OUT1–6 AUX1–6
OUT7–8 MAIN L, R
OUT9–40 CH1–32 DIRECT OUT
CONSOLE OUT1–6 AUX1–6
OUT7–8 MONITOR L, R
DIGITAL OUT L/R MONITOR L, R
M-480_e.book 86 ページ ２０１１年３月２日 水曜日 午前９時２０分
To Next Page
Loading...
Need help?
General
