Roland Soljet EJ-640 - Checking the Amount of Remaining Ink

Accommodating Different Media Types and Conditions
4
Advanced Functions
101
Preventing Soiling of the Media and Dot Drop-Out
Procedure

Press .

Press several times to display the screen shown
on the left.
Press
.

Press several times to display the screen shown
on the left.
Press
.

Press or to select a value.
Press
to conrm your entry.
NONE
Automatic cleaning is not performed.
PAGE
Automatic cleaning is performed every time before printing starts.
INTERVAL (JOB)
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here. However, if this time is reached during
printing, automatic cleaning is performed before the next printing
operation starts. Because printing is not paused, uneven color issues
due to paused operation do not occur.
INTERVAL (TIME)
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here. When this time is reached during
printing, printing pauses and so colors may be uneven.

Press , then to go back to the original screen.
Description
In the following cases, ink tends to collect on the surface of the print heads. Under some conditions, this ink
may be transferred to the media or cause dot drop-out.
 When you use media prone to static electricity buildup.
 When the ambient temperature is low.
 When the print head height is set to “HIGH.”
If "PAGE," "INTERVAL (JOB)," or "INTERVAL (TIME)" is selected, ink buildup is removed before or during printing.
Note, however, that using these settings results in longer printing times.
Default Setting
[PERIODIC CL.]: NONE
MENU
SUB MENU
SUB MENU
PERIODIC CL.
PERIODIC CL.
NONE