Output Operation Management
5
To Admin-
istrators
110
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed
Set the machine to display
every time the media is changed.
Procedure
Press .
Press to display the screen shown on the left.
Press
.
Press twice to display the screen shown on the
left.
Press
.
Press or to select "ENABLE."
Press
to conrm your entry.
If you select "ENABLE," you must set the [SHEET TYPE] menu item to
"OPAQUE."
P. 96, "Using Transparent Media"
Press , then to go back to the original screen.
Description
Setting this menu item to “ENABLE” can keep you from forgetting to redo the setting when you change the
media. However, be sure to also set the [SHEET TYPE] menu item to "OPAQUE" (P. 96, "Using Transparent
Media"). When [SHEET TYPE] is set to "CLEAR," [SHEET REMAIN] is not displayed automatically.
Default Setting
[AUTO DISPLAY]: DISABLE
To Next Page
Loading...
Need help?
General