Maintenance That Should Be Performed Once a Month or More
3
Maintenance
61
Manual Cleaning
CAUTION
Be sure to perform operations as specied by the instructions, and never
touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
1.
Enter manual cleaning mode.
Remove any media.
Press .
Press several times to display the screen shown
on the left.
Press
.
Important notes on this procedure
Before attempting this operation, remove any media.
To prevent the print heads from drying out, nish this procedure in 30 minutes or less. A warning
beep sounds after 30 minutes.
Never use any implements other than the included cleaning sticks. Cotton swabs or other lint-
producing items may damage the print heads. If you use up the cleaning sticks, contact your
authorized Roland DG Corp. dealer.
Use one cleaning stick per cleaning session, and then discard the stick after use. Reusing cleaning
sticks will reduce the printing quality.
Do not put a cleaning stick that has been used for cleaning into the cleaning liquid. Doing so will
deteriorate the cleaning liquid.
Never rub the print head surface (nozzle surface).
Stroke the sponges very gently, applying as little pressure as possible. Never rub, scrape, or crush
them.
If a warning beep sounds during cleaning
A warning beep sounds 30 minutes after operation starts. Temporarily stop work, attach the left and
right covers, and then close the front cover. Press
to end the manual cleaning mode. After
that, restart the procedure from the beginning.
Required item
Cleaning stick
MENU
SUB MENU
To Next Page
Loading...
Need help?
General