18
2
Basic
Operation
Preparing the Media
Types of Media
In this manual, the paper used for output is called "media." There are the following two main media types
used in this machine.
Roll media: Media wound onto a paper tube
Sheet media: Media not wound onto a paper tube such as standard-size media
Various paper quality types of roll media and sheet media are selectable according to your purpose. For de-
tailed information about each media, contact your media supplier. Media is also available from our website.
http://www.rolanddg.com/
Conditions for Usable Media
This machine cannot print on every kind of media. When selecting media, be sure to carry out testing in ad-
vance to make sure that satisfactory printing quality is obtained.
Size
Width
259 to 1,625 mm (10.2 to 64 inches)
Maximum media (including backing
paper) thickness (for both roll media
and sheet media)
1.0 mm (39 mil)
Maximum roll outer diameter
210 mm (8.2 inches)
Paper tube (core) inner diameter
76.2 mm (3 inches) or 50.8 mm (2 inches)*
* To use 2-inch media, the optional media anges are required. For information about optional items, contact
your authorized Roland DG Corp. dealer.
Maximum Roll Weight
40 kg (88 lb.)
Other Conditions
Media such as the following cannot be used.
Media whose end is attached to the paper tube (core)
Media that is severely warped or that has a strong tendency to reroll
Media that cannot withstand the heat of the media heating system
Media whose paper tube (core) is bent or crushed
Media that bends under its own weight when loaded
Media on a sagging roll
Media that is rolled unevenly
To Next Page
Loading...
Need help?
General