Maintenance That Should Be Performed Daily
3
Maintenance
54
Cleaning
WARNING
Never use a solvent such as gasoline, alcohol, or thinner to perform
cleaning.
Doing so may cause a re.
CAUTION
Before attempting cleaning, switch off the sub power and wait until the
platen and dryer cool (approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may
cause burns.
Wipe away any ink or grime on the media path and other areas as part of the daily cleaning procedure. Pinch
rollers, grit rollers, and the platen are particularly prone to the buildup of grime. Clean by wiping with a cloth
moistened with neutral detergent diluted with water then wrung dry.
This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
Never attempt to oil or lubricate the machine.
Wipe away any buildup of ink or
grime on the media path.
Grit rollers
Remove buildup of media scraps and other material using
a brush. Never use a metal brush.
Pinch rollers
Periodically wipe away any grime. Failure to clean this
part properly may result in the transfer of grime to the
surface of media.
Separating knife roller
This part is prone to paper dust buildup. Periodi-
cally wipe the area clean. Failure to clean this part
properly may result in the transfer of grime to the
surface of media.
To Next Page
Loading...
Need help?
General