Roland V-Drums TD-8 User Manual

116
Chapter 5 Playing Along with Patterns
Deleting a Pattern [DELETE]
This deletes the pattern performance, beat, measure length,
part, and all other settings, creating a empty pattern.
fig.06-051a.j
fig.06-051b 6
1. Press [PATTERN], then [F3 ( MENU)].
[PATTERN] lights, and a pop-up menu appears.
2. Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [ ] or [ ] to move the cursor to
“EDIT.”
3. Press [F3] to confirm your choice.
The “PATTERN EDIT” screen appears.
4. Press CURSOR [ ] to move the cursor to “EDIT.”
5. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select “DELETE.”
The “DELETE” screen appears.
6. Press CURSOR [ ] to move the cursor to “PATTERN.”
7. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select the pattern to be deleted.
8. Press [F3 (EXEC)].
The confirmation screen appears.
ffig.06-051c
9. Again, press [F3 (EXEC)].
Press [F1 (CANCEL)] to cancel the operation.
PATTERN: 701–800
Select the pattern to be deleted.
Indicated from left to right are the pattern number and
pattern name.
Deleting an Unneeded Measure
This deletes unneeded measures from the pattern, then
connects the portions before and after the resulting gap.
fig.06-051.e
• The performance data following the deleted range is
moved forward (and the performance data for that part
is shortened).
• When all parts in the targeted range are specified,
deletion results in the pattern itself becoming shorter.
• When all measures for all parts are deleted, the pattern
itself is deleted, resulting in a pattern containing no
performance data (an empty pattern). Settings, including
beat and measure length, are restored to their initial
values as well.
ffig.06-052
1. Follow the procedures in Steps 1.–7. of “Deleting a
Pattern [DELETE]” (p. 116) to specify the pattern
containing unneeded measures that are to be deleted.
2. Press [F2 (MEASURE)].
The “DELETE MEASURE” screen appears.
3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
specify.
4. Press CURSOR [ ] or [ ] to move the cursor to the
item to be selected.
Indicated from the left is the first measure, followed by
the last measure.
5. Press [F3 (EXEC)].
The confirmation screen appears.
fig.06-053
6. Again, press [F3 (EXEC)].
Press [F1 (CANCEL)] to cancel the operation.
12 643785
1
12 643785
123778

Roland V-Drums TD-8 Specifications

General

Brand	Roland
Model	V-Drums TD-8
Category	Drums
Language	English