171
Troubleshooting
Appendices
Display-related Problems
Settings Screen Not Switched or Cursor
Not Moved When Pad is Struck
• Is the instrument’s settings screen locked (Edit Lock)?
→ Use [TRIG SELECT] to select another pad.
Edit Lock (p. 83) can only be released from the TD-8.
Trigger indicators light on their Own
• Is a monitor speaker or the like sounding at a high
volume nearby a pad?
→ Either move the speaker, or change the angle of the
pad. Also verify the mounting of the pads and that
the stand is stable in order to eliminate excess
vibrations.
The vibration of the speaker can sometimes be
detected by the pad as a trigger signal.
Display Is Too Light Or Too Dark
→ The visibility of the display will change depending on
the viewing angle and on room lighting conditions.
The visibility of the display will change depending on
the viewing angle and on room lighting conditions.
By holding down [KIT] and rotating the VALUE dial,
you can adjust the contrast of the display.
To Next Page
Loading...
Need help?
General