88
Chapter 2 Making the Settings for Drum Instruments
Making the Settings for Pitch
and Decay (EDIT)
For instruments other than the V-KICK, V-SNARE, or V-
TOM, only pitch and decay can be adjusted.
fig.03-009
1. Press [KIT], then [F1 (INST)].
[KIT] lights, and the “INST” screen appears.
2. Strike a pad.
The settings screen for the struck pad appears.
3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select an instrument other than the V-KICK, V-SNARE,
or V-TOM.
4. Press [F2 (EDIT)].
5. Press CURSOR [ ] or [ ] to move the cursor to the
parameter to be set.
6. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
7. Press [KIT].
The “DRUM KIT” screen appears.
PITCH: -480–+480
Adjusts the pitch of the sound.
DECAY: -31–+31
Adjusts the decay time of the sound.
For some instruments, raising/lowering the value beyond a
certain level will not produce any further change in
“DECAY.”
To Next Page
Loading...
Need help?
General