Roland V-Drums TD-8 User Manual

95
Chapter 4 Playing While Listening to Metronome Clicks
Chapter 4
Setting How the Sound Plays
(Interval)
fig.05-003
1. Press [CLICK], then [F1 (INTRVL)].
[CLICK] lights, and the “CLICK INTERVAL” screen
appears.
2. Press CURSOR [ ] or [ ] to move the cursor to
“INTERVAL.”
3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
INTERVAL: 1/2 (half note), 3/8 (dotted
quarter note), 1/4 (quarter note),
1/8 (eighth note), 1/12 (12th
note), 1/16 (16th note)
Choosing a Sound
You can choose the sound for the metronome click. When the
parameter is set to “VOICE,” the click is sound becomes a
human voice.
fig.05-004
1. Press [CLICK], then [F2 (INST)].
[CLICK] lights, and the “CLICK INST” screen appears.
2. Press CURSOR [ ] to move the cursor to “INST.”
3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
INST: VOICE, CLICK, BEEP, METRONOME,
CLAVES, WOOD BLOCK, STICKS, CROSS
STICK, TRIANGLE, COWBELL, CONGA,
TALKING DRUM, MARACAS, CABASA,
CUICA, AGOGO, TAMBOURINE, SNAPS,
909 SNARE, 808 COWBELL
Changing the Panning
(Stereo Position)
You can localize the metronome click within the stereo sound
field.
fig.05-005
1. Press [CLICK], then [F2 (INST)].
[CLICK] lights, and the “CLICK INST” screen appears.
2. Press CURSOR [ ] or [ ] to move the cursor to
“PAN.”
3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
“L15” is far left, “CTR” is center, and “R15” is far right.
PAN: L15–CTR (CENTER)–R15
Choosing the Output
Destination
You can select the output for the metronome click.
fig.05-006
1. Press [CLICK], then [F2 (INST)].
[CLICK] lights, and the “CLICK INST” screen appears.
2. Press CURSOR [ ] to move the cursor to “OUTPUT.”
3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
OUTPUT: BOTH, PHONES
BOTH:
Output from the MASTER OUT and PHONES jacks.
PHONES:
Output only from the PHONES jacks.

Roland V-Drums TD-8 Specifications

General

Brand	Roland
Model	V-Drums TD-8
Category	Drums
Language	English