Roland V-Drums TD-8 User Manual

81
Chapter 1 Making the Settings for the Drum Kit
Chapter 1
Adjusting the Pedal Hi-Hat
Volume
(PEDAL HI-HAT VOLUME)
For each kit, you can adjust the volume of the pedal hi-hat
that pertains when the hi-hat control pedal is pressed. The
higher the value is set, the greater the volume. With a setting
of “0,” no sound is produced.
fig.02-005 (kit func)
1. Press [KIT], then [F3 ( MENU)].
[KIT] lights, and a pop-up menu appears.
2. Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [ ] or [ ] to move the cursor to
“FUNC.”
3. Press [F3] to confirm your choice.
4. Press [F2 (PEDAL)].
The “PEDAL” screen appears.
5. Press CURSOR [ ] to move the cursor to “PEDAL HI-
HAT VOLUME.”
6. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
7. Press [KIT].
The “DRUM KIT” screen appears.
PEDAL HI-HAT VOLUME: 0–15
Use [MIXER] to adjust the volume of other pads.
Switching Effects On and Off
Ambience, and the equalizer setting can be turned on/off for
each kit.
fig.02-006
1. Press [KIT], then [F3 ( MENU)].
[KIT] lights, and a pop-up menu appears.
2. Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [ ] or [ ] to move the cursor to “FX
SW.”
3. Press [F3] to confirm your choice.
The “FX SW” screen appears.
4. Press [F1] or [F3].
Each one switches its respective effect on and off.
[F1]:
Switch Ambience (AMB) on and off.
[F3]:
Switch Equalizer (EQ) on and off.
5. Press [KIT].
The “DRUM KIT” screen appears.
Effects that are set to “ON” are indicated in the “DRUM
KIT” screen.
Example:
When both Ambience and Equalizer are on, the
following appears.
“FX SW” screen
fig.02-007
“KIT” screen
fig.02-008

Roland V-Drums TD-8 Specifications

General

Brand	Roland
Model	V-Drums TD-8
Category	Drums
Language	English