Roland V-Drums TD-8 User Manual

129
Chapter 7 Making Global Settings for the TD-8
Chapter 7
Setting the Pad Sensitivity
(BASIC TRIGGER PARAMETERS)
When you are using pads made by other manufacturers, try
adjusting the following parameters.
You can jump directly to the ”TRIGGER ADVANCED”
screen by pressing [F1 (ADVNCD)].
SENSITIVITY
Adjust the sensitivity of the pad to regulate the pad response.
fig.08-004
1. Press [SETUP], then [F1 (TRIG)], and then [F1 (BASIC)].
[SETUP] lights, and the “TRIGGER BASIC” screen
appears.
2. Press CURSOR [ ] to move the cursor to
“SENSITIVITY.”
3. Strike a pad.
The settings screen for the struck pad appears and an
input indicator will move in the right part of the screen.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
Adjust the “SENSITIVITY” value so that the strongest
strikes cause the input indicator to reach nearly all the
way to the maximum level. Increasing this value will
raise the sensitivity.
SENSITIVITY: 1–16
THRESHOLD
This setting allows a trigger signal to be received only when
the pad is struck harder than a specified force. In the
following example, signal 2 will sound, but signals 1 and 3
will not sound.
fig.08-005.e
fig.08-006
1. Press [SETUP], then [F1 (TRIG)], and then [F1 (BASIC)].
[SETUP] lights, and the “TRIGGER BASIC” screen
appears.
2. Press CURSOR [ ] or [ ] to move the cursor to
“THRESHOLD.”
3. Strike a pad.
The settings screen for the struck pad appears and an
input indicator will move in the right part of the screen.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
Gradually raise the Threshold value.
However if this value is raised too far, playing softly on
the pad will not be detected. Check this and adjust
accordingly. Repeat this process until you get the perfect
setting for your playing style.
THRESHOLD: 0–15
CURVE
This setting allows to control the relation between the
velocity (striking force) and changes in volume (the dynamic
curve.) Adjust this curve until the response feels as natural as
possible.
fig.08-007
1. Press [SETUP], then [F1 (TRIG)], and then [F1 (BASIC)].
[SETUP] lights, and the “TRIGGER BASIC” screen
appears.
2. Press CURSOR [ ] or [ ] to move the cursor to
“CURVE.”
3. Strike a pad.
The settings screen for the struck pad appears and an
input indicator will move in the right part of the screen.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
231
Threshold Level

Roland V-Drums TD-8 Specifications

General

Brand	Roland
Model	V-Drums TD-8
Category	Drums
Language	English

Summary

Owner's Manual Introduction and Safety

Safety Warnings and Precautions

Essential safety guidelines for proper unit operation and user protection.

Getting Started and System Setup

Panel Overview and Basic Connections

Identifies front and rear panel controls and essential input/output connectors for operation.

Quick Start and Initial Operation Guide

Provides a simplified path for new users to begin playing and configuring the TD-8.

Connecting Pads, Pedals, and Audio System

Details on connecting external hardware like pads, pedals, and audio output devices.

Core Operations: Playing and Modifying Sounds

Pad Configuration and Performance Techniques

Details on specifying pad types, settings, and playing techniques like rim shots.

Modifying Drum Kit Sounds (V-EDIT)

Explains sound modeling parameters like shell depth, head type, tuning, and ambience.

Playing Along with Accompaniment and Patterns

Covers playing back internal patterns and songs for practice.

Advanced Features and MIDI Integration

Chapter 7: Global Settings for TD-8

Details system-wide configurations for pads, triggers, display, and tuning.

Chapter 9: MIDI Features and Implementation

Explains MIDI connectivity, data transmission, and module control for external devices.

Troubleshooting and Reference Information

Troubleshooting Common Problems and Error Messages

Provides solutions for issues related to sound, pads, MIDI, display, and system errors.

Appendices: Lists, Specifications, and MIDI Implementation

Contains reference lists for kits, instruments, patterns, specs, and MIDI data.