9-6
OP27,
OP37 Equipment Manual
Release 05/99
Use
Slot A for inserting the memory card on the OP27, and Slot B on the OP37
(refer to Chapters 16.3 and 17.3).
A backup Flash
!
Module can be carried out in normal operation of the OP:
Step Action
1 Insert the memory card in Slot A of the OP27 or Slot B of the OP37.
2 Delete or initialize the memory card prior to backup.
3 Press the function key, depicted on the right, in the Backup/Re-
store standard screen, thus initiating the Backup function. A
message is issued on the OP following successful transfer.
4 Remove the memory card from the OP.
If
a memory card only contains recipe data records, they can be transferred
back in normal operation of the OP:
Step Action
1 Insert the memory card in Slot A of the OP27 or Slot B of the OP37.
2 Press the function key, depicted on the right, in the Backup/Re-
store standard screen, thus initiating the Backup function.
The recipe data records in the internal flash memory are over-
written by the data records stored on the memory card.
3 Remove the memory card from the OP.
Note
Recipe
data records stored on the memory card with the backup function must
be restored to the internal flash memory on the OP before they can be edited.
Recipe data records created directly on the memory card (e.g. by using the
standard screens
Data Recor
d Pr
ocessing and T
ransmission and Selective
Data Recor
d T
ransmission), cannot
be transferred back to the internal flash
memory by means of the restore function.
Inserting
memory
card
Backup
flash ³
module
Restore
module
³ flash
Storin
To Next Page
Loading...
Need help?
General
