3-10
OP27,
OP37 Equipment Manual
Release 05/99
In
the case of an incorrect entry
, the following possibilities are available with
which to correct it before confirmation. Call in Edit mode.
Incorrect
Input
Action Using Key
Incorrect digit Position the cursor on the digit and over-
write it.
The cursor remains at this position.
One digit too
many
Delete the digit at the cursor position.
The gap is closed from the left.
DEL
INS
One digit too few
1. Switch to alphanumeric key assign-
ment.
A–Z
2. Insert a blank at the cursor position.
Input moves to the left of the cursor
position.
DEL
INS
3. Revert to the numeric input key
assignment.
A–Z
A–Z
4. Overwrite the space.
3.3.2 Entering Alphanumeric Values
Alphanumeric
values are entered character for character using the system key
-
board input keys.
Alphanumeric input can be used to enter digits and letters in any order
. Spaces
are also allowed.
Carry out the following steps to enter alphanumeric values:
Step Keys Description
1
Enter num-
bers
+/–
9
0
.
...
,
The input keys of the system keypad are to
be found in the numeric key assignment.
Enter alpha
characters
A–Z
Switch to the alphanumeric key assign-
ment.
...
AB ZY
Correct input
Input using the
system keys
General Operation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
