9-3
OP27,
OP37 Equipment Manual
Release 05/99
9.2 Clear/Initialize Storage Medium
Before
beginning making a backup copy of new recipe data or a modified con
-
figuration, delete or initialize the tar
get data medium. This establishes a
defined status for the data medium.
Make sure that the storage module is not inserted when the flash memory is to
be deleted because the OP accesses the storage module when switching to
Download mode.
Note
All data on the data medium is lost as a result of deletion. All existing config
-
urations are deleted on initialization, but the recipe data records are retained.
Perform the following steps to clear or initialize memory:
Step Action
1 Switch off the power supply to the OP. Press the
adjacent key combination to restart.
ESC
+
+
2 Insert the memory card to delete or initialize data
on it. The following messages appear in succession
on the OP:
Press
‘DEL’ to erase total Flash
Press ‘DEL’ to init Flash
Press ‘DEL’ to erase total Modules
Press ‘DEL’ to init Module
3 Scroll to the next message using the keys depicted
on the right.
ENTER
or
ESC
4 Confirm the selected function with the keys depic-
ted on the right.
DEL
INS
Delete flash/
memory card
Storin
To Next Page
Loading...
Need help?
General
