Siemens simatic hmi op27 User Manual

8-8
OP27, OP37 Equipment Manual
Release 05/99
8.1.1 Creating, Editing and Saving Data Records
The data structure is defined with the recipe during configuration. Initially ,
there are no data records. They are created, edited and stored on data media
directly on the OP using the Data Recor d Pr ocessing standard screen.
How to operate the standard screen Data Recor d Pr ocessing is the subject of
this section.
Before a data record can be stored, the data medium must be formatted. To do
this, use the formatting function in the input field beneath the data medium
selection.
Note
Any data records on the data medium are deleted by the formatting operation.
Formatting of a data medium cannot be undone.
Step Action
1 Position the cursor in the Data Record Processing stan-
dard screen on the symbolic input field Format:
2 Open the selection window with:
ENTER
3 Select the formatting function from the selection window
with:
4 Confirn the selection with:
ENTER
5
Confirm the confirmation request in the following two system message
with “Yes” by entering 0
or cancel the action with:
ESC
In this section
Formatting data
media
Recipes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Siemens simatic hmi op27 Specifications

General

Brand	Siemens
Model	simatic hmi op27
Category	Control Panel
Language	English