Service and maintenance
11.2 Reinstalling the software
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
109
Installing a CPU cooler
How to install the CPU cooler
1. Make sure that the heat sink pad
on the CPU cooler is intact.
2. Perform the tasks describe above
in reverse order. Turn all the
screws diagonally and tighten them
uniformly, alternating to prevent
skewing.
11.1.11 Processor replacement
Removing the processor
Since the processor is soldered to the motherboard, it has to be replaced completely.
Observe the information in the Chapter
7Removing the motherboard (Page 3105).
11.2 Reinstalling the software
11.2.1 General installation procedure
If your software is corrupt, you can reinstall it using the recovery CD or DVD, the
Documentation and Drivers CD and the Restore DVD.
To Next Page
Loading...
Need help?
General
