SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
7
Introduction
1
1.1 Preface
Purpose of this documentation
These operating instructions contain all the information you need for commissioning and
operation of the SIMATIC IPC647C .
It is aimed at both programmers and testers who are commissioning the device themselves
and are combining the device with other units (automation systems, programming devices),
as well as service and maintenance technicians installing expansions or undertaking fault
analysis.
Scope of this documentation
The documentation is valid for all supplied variations of the SIMATIC IPC647C and describe
the product status as of June 2010.
Position in the information landscape
These operating instructions are available on the "Documentation and Drivers" CD included
with your product.
For supplementary instructions on how to handle the software, please refer to the
corresponding manuals.
Conventions
The term "rack PC" or "device" is sometimes used to refer to the SIMATIC IPC647C product
in this documentation. The abbreviation "CP" stands for CP 1616 onboard.
History
The following releases of the operating instructions have previously been published:
Edition Comment
07/2010 First Edition
11/2010 Second edition changes: BIOS setup, AMT, technical data
To Next Page
Loading...
Need help?
General
