Expansions and parameter assignment
10.4 Drive racks and storage media
SIMATIC IPC647C
78 Operating Instructions, 12/2010, A5E02669337-02
Notes on the allocation of resources
Only two exclusive interrupts are available for PCI /PCIe modules due to the large functional
scope of the motherboard. If the new expansion modules require additional exclusive
resources, you need to disable some functions on the motherboard. For information on
allocated resources, refer to the section
4System resources (Page 2173). Information on
disabling motherboard functions is available in the
4BIOS Setup (Page 2178). You can find
information on the assignment of the PCI IRQ line to the PCI slot in the sections
4Advanced
menu (Page
2182) and 4Bus boards (Page 2167).
The device supports graphics modules with expansion ROM of up to 48 K.
10.4 Drive racks and storage media
10.4.1 Overview
Drives and storage media
You can mount the following drives and media In the drive racks:
● Hard disk drive (HDD)
● Solid-State Drive (SSD)
● Card rack for Compact Flash Card (CF memory card)
● DVD drive
To Next Page
Loading...
Need help?
General
