Detailed descriptions
16.5 BIOS Setup
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
201
16.5.12 BIOS Setup default settings
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
Note
The default setup settings vary depending on the ordered device configuration.
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
BIOS Setup default settings
System parameters Default settings Local settings
Main
System Time hh:mm:ss
System Date MM/DD/YYYY
System parameters Default settings Local settings
Advanced>Peripheral
Configuration
Internal COM 1 Auto
Internal COM 2 Auto
Internal LPT Auto
Audio Enabled
Onboard Ethernet 1 Enabled
Onboard Ethernet 2 Enabled
PCI – MPI / DP Enabled
Profinet
System parameters Default settings Local settings
Advanced>SATA Configuration
SATA Controller Enabled
SATA Controller mode AHCI
To Next Page
Loading...
Need help?
General
