Siemens SIMATIC PCS 7 CPU 410-5H User Manual

I/O configuration variants
4.3 Fault-tolerant automation systems (redundancy operation)
CPU 410-5H Process Automation
System Manual, 09/2014, A5E31622160-AB
57
4.3
Fault-tolerant automation systems (redundancy operation)
4.3.1
Redundant SIMATIC automation systems
Operating objectives of redundant automation systems
Redundant automation systems are used in practice with the aim of achieving a higher
degree of availability or fault tolerance.
Figure 4-4 Operating objectives of redundant automation systems
Note the difference between fault-tolerant and fail-safe systems.
The S7-400H is a fault-tolerant automation system. You may only use the S7-400H to
control safety-related processes if you have programmed it and assigned its parameters in
accordance with the rules for F-systems. You can find details in the following manual:
SIMATIC Industrial Software S7 F/FH Systems
(http://support.automation.siemens.com/WW/view/en/2201072)
Why fault-tolerant automation systems?
The purpose of using fault-tolerant automation systems is to reduce production downtimes,
regardless of whether the failures are caused by an error/fault or are due to maintenance
work.
The higher the costs of production stops, the greater the need to use a fault-tolerant system.
The generally higher investment costs of fault-tolerant systems are soon recovered since
production stops are avoided.

Siemens SIMATIC PCS 7 CPU 410-5H Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 CPU 410-5H
Category	Controller
Language	English