SMC Networks TigerStack II SMC8848M User Manual

L AYER 2 Q UEUE S ETTINGS
12-5
Web – Click Priority, Traffic Classes. Assign priorities to the traffic classes
(i.e., output queues), then click Apply.
Figure 12-2 Traffic Classes
CLI – The following example shows how to change the CoS assignments
to a one-to-one mapping.
* Mapping specific values for CoS priorities is implemented as an interface configura-
tion command, but any changes will apply to the all interfaces on the switch.
Console(config)#interface ethernet 1/1 24-2
Console(config)#queue cos-map 0 0 31-5
Console(config)#queue cos-map 1 1
Console(config)#queue cos-map 2 2
Console(config)#exit
Console#show queue cos-map 31-8
Information of Eth 1/1
CoS Value: 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
Information of Eth 1/2
CoS Value: 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
.
.
.

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English