SMC Networks TigerStack II SMC8848M User Manual

IP I NTERFACE C OMMANDS
36-24
This example displays a brief summary of IPv6 addresses configured on
the router.
Related Commands
show ip interface (36-8)
ipv6 default-gateway
This command sets an IPv6 default gateway to use for destinations with no
known next hop. Use the no form to remove a previously configured
default gateway.
Syntax
ipv6 default-gateway ipv6-address
no ipv6 address
ipv6-address - The IPv6 address of the default next hop router to use
when no other routing information is known about an IPv6
address. The address must be formatted according to RFC 2373
“IPv6 Addressing Architecture,” using 8 colon-separated 16-bit
hexadecimal values. One double colon may be used in the address
to indicate the appropriate number of zeros required to fill the
undefined fields.
ND DAD Indicates whether (neighbor discovery) duplicate address
detection is enabled.
number of DAD
attempts
The number of consecutive neighbor solicitation messages
sent on the interface during duplicate address detection.
Console#show ipv6 interface brief
Vlan 1 is up
IPv6 is enable.
FF01::1
2009:DB9:2229::79
FE80::269:3EF9:FE19:6779
FF02::1
FF02::1:FF00:79
FF02::1:FF19:6779
Console#
Table 36-3 show ipv6 interface - display description (Continued)
Field Description

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English