SMC Networks TigerStack II SMC8848M User Manual

33-1
C HAPTER 33
M ULTICAST F ILTERING
C OMMANDS
This switch uses IGMP (Internet Group Management Protocol) to query
for any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data
out to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to
receive the multicast service.
Table 33-1 Multicast Filtering Commands
Command Groups Function Page
IGMP Snooping Configures multicast groups via IGMP snooping
or static assignment, sets the IGMP version,
displays current snooping and query settings, and
displays the multicast service and group members
33-2
IGMP Query Configures IGMP query parameters for multicast
filtering
33-6
Static Multicast
Routing
Configures static multicast router ports 33-11

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English