SMC Networks TigerStack II SMC8848M User Manual

L INK A GGREGATION C OMMANDS
25-10
show lacp
This command displays LACP information.
Syntax
show lacp [port-channel] {counters | internal | neighbors | sys-id}
• port-channel - Local identifier for a link aggregation group.
(Range: 1-32)
• counters - Statistics for LACP protocol messages.
• internal - Configuration settings and operational state for local
side.
• neighbors - Configuration settings and operational state for
remote side.
• sys-id - Summary of system priority and MAC address for all
channel groups.
Default Setting
Port Channel: all
Command Mode
Privileged Exec
Example
Console#show lacp 1 counters
Port channel: 1
-------------------------------------------------------------------
Eth 1/ 2
-------------------------------------------------------------------
LACPDUs Sent: 10
LACPDUs Receive: 5
Marker Sent: 0
Marker Receive: 0
LACPDUs Unknown Pkts: 0
LACPDUs Illegal Pkts: 0
.
.
.

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English