SMC Networks TigerStack II SMC8848M User Manual

U SER A UTHENTICATION C OMMANDS
22-10
radius-server port
This command sets the RADIUS server network port. Use the no form to
restore the default.
Syntax
radius-server port port_number
no radius-server port
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
radius-server key
This command sets the RADIUS encryption key. Use the no form to
restore the default.
Syntax
radius-server key key_string
no radius-server key
key_string - Encryption key used to authenticate logon access for
client. Do not use blank spaces in the string. (Maximum length: 48
characters)
Default Setting
None
Command Mode
Global Configuration
Console(config)#radius-server port 181
Console(config)#

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English