SMC Networks TigerStack II SMC8848M User Manual

M ULTICAST F ILTERING C OMMANDS
33-2
IGMP Snooping Commands
This section describes commands used to configure IGMP snooping on
the switch.
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form
to disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
Table 33-2 IGMP Snooping Commands
Command Function Mode Page
ip igmp snooping Enables IGMP snooping GC 33-2
ip igmp snooping vlan
static
Adds an interface as a member of a
multicast group
GC 33-3
ip igmp snooping
version
Configures the IGMP version for
snooping
GC 33-3
show ip igmp snooping Shows the IGMP snooping and query
configuration
PE 33-4
show
mac-address-table
multicast
Shows the IGMP snooping MAC
multicast list
PE 33-5
Console(config)#ip igmp snooping
Console(config)#

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English