SMC Networks TigerStack II SMC8848M User Manual

IP R OUTING C OMMANDS
37-8
Routing Information Protocol (RIP)
Table 37-5 Routing Information Protocol Commands
Command Function Mode Page
router rip Enables the RIP routing protocol GC 37-9
default-metric Sets the default metric assigned to external
routes imported from other protocols
RC 37-9
timers basic Sets basic timers, including update, timeout,
garbage collection
RC 37-11
network Specifies the network interfaces that are to
use RIP routing
RC 37-12
neighbor Defines a neighboring router with which to
exchange information
RC 37-13
version Specifies the RIP version to use on all
network interfaces (if not already specified
with a receive version or send version
command)
RC 37-15
redistribute Redistribute routes from one routing
domain to
another
RC 37-15
ip rip receive version Sets the RIP receive version to use on a
network interface
IC 37-16
ip rip send version Sets the RIP send version to use on a
network interface
IC 37-17
ip split-horizon Enables split-horizon or poison-reverse
loop prevention
IC 37-19
ip rip authentication
key
Enables authentication for RIP2 packets
and specifies keys
IC 37-20
ip rip authentication
mode
Specifies the type of authentication used for
RIP2 packets
IC 37-21
show rip globals Displays global configuration settings and
statistics for RIP
PE 37-22
show ip rip Displays RIP configuration information for
each network interface
PE 37-22

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English