S2/S2BW
Digital Color Doppler Ultrasound System
Chapter 2
System Safety and Maintenance
2.1 Safety Overview
This section discusses measures to ensure the safety of both the operator and patient.
To ensure the safety of both operator and patient, please read the relevant details in this chapter carefully
before operating this system. Disregarding the WARNINGS or violation of relevant rules may result in personal
injury or even loss of life for operator or patient.
Users should observe the following PRECAUTIONS:
• This system complies with Type BF general equipment, and the EN60601-1 standard.
•
Do not modify this system in any way. Necessary modifications must be made only by the manufacturer
or its designated agents.
• This system has been fully adjusted at the factory. Do not adjust any fixed adjustable parts.
•
In the event of a malfunction, turn off the system immediately and inform the manufacturer or its
designated agents.
•
The power cable of the system should only be connected to a grounded power socket. Do not remove
the ground cable for any reason.
•
Only connect this system, either electronically or mechanically, with devices that comply with the
EN60601-1 standard. Recheck the leakage current and other safety performance indices of the entire
system to avoid potential system damage caused by leakage from a current superposition.
•
The system does not incorporate any specialized protective measures in the event it is configured with
high-frequency operation devices. The operator should use CAUTION in these types of applications.
•
The system should be installed only by personnel authorized by the manufacturer. Do not attempt to
install the system yourself.
• Only an authorized service engineer may perform maintenance.
• Only a qualified operator, or someone under qualified supervision, should use the system.
• Do not use this system in the presence of flammable substances or an explosion may occur.
•
Do not continuously scan the same part of a patient or expose the patient to prolonged scanning. Doing
so may harm the patient.
•
When using the system for ultrasound testing, use only qualified ultrasound gel that complies with
system standards.
P/N: 4710.00149A01
2-1
To Next Page
Loading...
Need help?
General
