S2/S2BW
Digital Color Doppler Ultrasound System
Chapter 6
B Mode
The ultrasound image of B mode originates from the tissue echo received by transducer. A series of process
like amplification, D/A transformation, beam-forming will be carried out by the system to form the gray-scale
image to reflect the echo intensity. The gray-scale image appears lighter when the echo signal is stronger.
6.1 Entering B Mode
Select an exam mode in the selection interface with your cursor, and press
SET
to enter into the scanning
mode, which is a B real-time mode as default.
When in other modes (e.g. CFM, M mode), you can also press the key to switch into B real-time
mode from other mode.
A B-mode image displays in Figure 6.1.
Figure 6.1: B mode
6.2 Parameter Adjustment
P/N: 4710.00149A01
6-1
To Next Page
Loading...
Need help?
General
