To Next Page

To Previous Page

S2/S2BW

Digital Color Doppler Ultrasound System

When in CFM mode, press

key before freeze, you will see this menu:

Real time CFM mode menu

Frequency 2.5MHz

Line Density High

Wall Filter 600

B Reject 26

Persis 3

C. Map 4

Power% 60%

In CFM mode, when you press

Freeze

key, then press

, you will see a different menu as

follow:

Frozen CFM mode menu

C. Map 4

B Reject 26



Note

• Press the

key to pop up the adjustment menu;

• Turn the

AUDIO

knob to switch from one item to another;

• Turn the

key to adjust each parameter;

7.2.1 FREQUENCY

This parameter controls the working frequency of the transducer.

Operate:

FREQUENCY

• Press

to pop up the menu, turn

AUDIO

knob to switich andhigh-llight the “Frequency” Item;

• Turn the

key clock-wise to increase frequency, counter-clockwise to decrease freqeuncy.

7.2.2 Line Density

Line desnity is the density of scanning lines in a set scanning width or scanning area. The Line Density

parameter is related to “Lateral Resolution” and “Frame Rate”. The higher Line Density, the better resolution,

but the frame rate will decrease. You can only adjust Line Density in active mode (not frozen).

Operate:

Line Density

• Turn

AUDIO

, to high-light the “Line Density” item;

• Turn

key, to adjust Line Density.

7.2.3 Wall Filter (WF)

This parameter controls the working frequency of the transducer.

P/N: 4710.00149A01

7-2

Brand	Sonoscape
Model	S2
Category	Medical Equipment
Language	English

Sonoscape S2 User Manual

Table of Contents

Other manuals for Sonoscape S2

Questions and Answers:

Sonoscape S2 Specifications

Related product manuals