47
Processing Recorded Data
Chapter 4 Recording and Playback
2
Use the V and v buttons to select [Protect], and press
the ENTER button.
The [Recording List] screen appears again.
3
Select the check boxes for the recorded data you want
to protect.
Select recorded data using the
V and v buttons, and
press the ENTER button to select or clear the check
box.
4
Use the V, v, B, and b buttons to select [Execute], and
press the ENTER button.
The recorded data is protected, and the icon
appears.
To remove protection
Select [UnProtect] in step 2 of the previous procedure, and
press the ENTER button. Perform the rest of the procedure
as shown.
Deleting Recorded Data
You can delete recorded data stored on the unit’s internal
hard disk for particular exams.
Recorded data can be deleted from the [Recording List]
screen.
Recorded data that is deleted cannot be restored.
To select data for deletion from the
[Recording List] screen
This section describes how to select recorded data for
deletion in the [Recording List] screen.
1
Display the [Recording List] screen, use the V, v, B,
and
b buttons to select the operation box, and press the
ENTER button.
For details on displaying the [Recording List] Screen,
see “Image Search” (page 40).
The following screen appears.
Note
The icon appears for recorded data that is protected.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
