72
Initial User Settings
Chapter 5 System Administrator Settings
3
Use the V and v buttons to select [Use], and press the
ENTER button.
Settings items for the NTP server appear.
4
Configure each setting.
Select an item using the
V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Address]
Enter the address for the NTP server using the on-
screen keyboard.
For details on using the on-screen keyboard, see
“Using the On-Screen Keyboard” (page 26).
[Port No.]
Enter the port number using the on-screen keyboard.
The default setting is [123].
For details on using the on-screen keyboard, see
“Using the On-Screen Keyboard” (page 26).
5
To configure settings in other tabs, use the V, v, B,
and
b buttons to select a tab.
If you are finished configuring [Network Settings], use
the
V, v, B, and b buttons to select [Apply], and press
the ENTER button to save the configurations.
Initial User Settings
Configure initial setting values related to recording quality
and storage media.
The settings configured here will be used as the initial
default settings when recording.
1
In the [System Admin Settings] screen, use the V, v,
B, and b buttons to select [Initial User Settings], and
press the ENTER button.
The [Initial User Settings] screen appears.
2
Use the B and b buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
“[Quality] Tab” (page 73)
“[Save] Tab” (page 73)
3
When you finish configuration, use the V, v, B, and b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
