To Next Page

To Previous Page

Set up a LIN serial bus

NOTE. LIN serial bus setup is available only on instruments with the SR-AUTO option.

From the Bus Setup window, select Serial from the Bus Type list and then select the LIN Serial bus type.

For information on the controls, click the buttons.

■

Bus List

■

Display & Clear

■

Label

■

Position

■

Serial Input

■

Serial Threshold

To use

■

To change the input for a component, click the Input and select a channel from the cascading lists.

■

To set the serial bus type, click the Serial Bus Type entry box and select from the drop-down list.

■

To change the voltage threshold level, click the Threshold entry box and use the keypad to enter a value or use the

multipurpose knobs to select a voltage level.

■

To set the polarity, click the Polarity entry box and select from the drop-down list.

■

To set the LIN standard, click the LIN Standard entry box and select from the drop-down list.

■

To set the bit rate, click the Bit Rate entry box and select from the drop-down list.

Behavior

The instrument changes the components and voltage threshold levels, and uses those to decode the selected bus.

What do you want to do next?

Learn more about bus setups.

Learn about bus configuration.

Learn about digital setups.

Learn how to set up an I2C serial bus.

Bus setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 129

Tektronix MSO73304DX Printable Help

Other manuals for Tektronix MSO73304DX