Tektronix MSO73304DX Printable Help

Set up a parallel bus
From the Bus Setup window, select a bus from the Bus list, select the Parallel bus type, and then click the Add Sources button.
Overview
When you acquire data from a Parallel bus, you can set up the bus to be clocked or unclocked.
To use
For information on the controls, click the buttons.
■
Bus List
■
Display & Clear
■
Label
■
Position
■
Add Sources
■
Thresholds
■
Bit Order
■
Remove
Behavior
If the bus is not clocked, the instrument acquires all data from the parallel bus at the sample rate of the instrument.
Digital channels are not available on SX models.
What do you want to do next?
Learn more about bus setups.
Learn about bus configuration.
Learn about digital setups.
Learn how to set up a parallel bus.
Learn how to troubleshoot circuits using a parallel bus.
Learn how to view analog characteristics of a digital waveform.
Learn how to trigger on a bus.
Bus setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 147

Tektronix MSO73304DX Specifications

General

Brand	Tektronix
Model	MSO73304DX
Category	Test Equipment
Language	English