Behavior. When the On/Off control is on, the mask is displayed on the graticule. When the On/Off control is off, the mask is not
displayed.
Click the Config button to replace the Mask Testing control window with the Mask Configuration Display control window.
What do you want to do next?
Learn about the Mask Configuration Display control window.
Learn about mask types.
Learn about mask alignment.
Go to the Mask Setup control window.
Mask configuration controls
Mask configuration control window - display. From the Mask menu, highlight Mask Configure; then select Display. From the
Mask Testing control window, click the Display Config button.
Overview. Use this control window to set whether changes in the scale will also be made in the mask. You can also use this
control window to return to the Mask Setup control window.
To use.
â–
Click the Lock Mask to Waveform button to turn it on and off.
â–
Click the Masks button to go to the Mask Testing control window.
Behavior. When the Lock Mask to Waveform button is turned on, any changes you make to the scale, vertical position or
horizontal position will be reflected in the mask. Turning on Highlight Hits displays the hits in a different color so they can be
easily seen. When you click the Mask button this window closes, and the Mask Setup control window opens.
What do you want to do next?
Go to the Mask Setup control window.
Learn more about mask configuration.
Mask testing setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 221
To Next Page
Loading...
Need help?
General
