TIP. Use the Display menu Display Format submenu to directly access the format types.
What do you want to do next?
Learn about changing the display colors.
Learn about using text with screen displays.
Learn about changing the appearance of objects in the display.
XY format pairs
When you use the XY display format, channel and reference waveforms are assigned to the axis indicated in the following table.
XY Pair X Axis Y Axis
Ch 1 and Ch 2 Ch 1 Ch 2
Ch 3 and Ch 4 Ch 3 Ch 4
Ref 1 and Ref 2 Ref 1 Ref 2
Ref 3 and Ref 4 Ref 3 Ref 4
On instruments with an ATI channel, channel waveformas ar assigned to the axis indicated in the following table.
XY Pair X Axis Y Axis
Ch 1 and Ch 3 Ch 1 Ch 3
If you only display one source when you enter the XY format, the instrument automatically turns on the other source waveform to
complete the XY pair.
NOTE. You cannot display math waveforms in XY format. You cannot display logic waveforms in XY or XYZ format.
Set the waveform intensity
From the Display menu, select Display Setup; then open the Appearance tab.
To use
â–
Click in the Record View entry box and use a multipurpose knob to adjust the intensity of live waveforms, except when using
Fast Acquisition or Waveform Database acquisition mode.
Display setups
174 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series
To Next Page
Loading...
Need help?
General
