Results Table
The Results Table displays all control channel information with columns indicating Request and Response activity for each
direction. Each row is time-stamped and contains a unique protocol event. Click on a row of the Results Table to see a decoded
waveform for the Control Channel. Rows with *** in the Frame Column do not have a waveform.
All Control Channel information is captured in the Results Table, whether or not a waveform is available.
Contents of the Results Table may be exported to a comma separated value (.CSV) file or queried over the instrument
programming interface (PI) for further post processing or formatting.
Using Link Training from the programming interface
Use the following commands to start Link Training:
LINKTRaining:STAte ON
LINKTRaining:ARMscope ON
Start Link Training on the DUT. Initiation of Link Training on the DUT is DUT-specific, but is typically done from a command line
console program.
The oscilloscope captures the Link Training information into a Results Table in real-time, and displays the marked and decoded
waveforms.
LinkTraining
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 215
To Next Page
Loading...
Need help?
General
