Set time and date
From the Utilities menu, select Set Time & Date.
Overview
Use the Set Time and Date control window to set the time and date on the instrument.
To use
â–
Click in the entry boxes to map them to the multipurpose knobs, and then use the knobs to set the time and date.
â–
Click the Set time and date now button to save your changes.
â–
You can also click Get current time to set the time using the system clock. This is useful if the instrument clock is out of
sync.
Behavior
The controls in this window operate the same as the standard Windows Date/Time Properties dialog box. After you click Set time
and date now, the system date and time are set to the specified values. These controls are provided as a convenience so you
can change the date and time without having to go to the Windows Control Panel > Date and Time properties dialog box.
TIP. The instrument clock is suspended when this window is open. Click Get current time to resynchronize the clock with the PC
clock.
Utilities
548 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series
To Next Page
Loading...
Need help?
General
