To Next Page

To Previous Page

Select the RS-232 bus parity

NOTE. The RS-232 Bus Parity option is available on instruments with option SR-COMP.

From the Bus Setup window, select the Select tab and the RS-232 Serial bus type.

To use

■

Scroll through the Bus list and select the RS-232 bus to configure.

■

Click the Parity box and select the parity from the drop-down list.

Behavior

Set the bus parity selection to:

■

None, the default.

■

Odd.

■

Even.

NOTE. There is no parity selection when the number of data bits is 9.

What do you want to do next?

Learn more about bus setups.

Learn about bus configuration.

Learn about digital setups.

Select the RS-232 bus bit rate

NOTE. The RS-232 Bus Bit Rate option is available on instruments with option SR-COMP.

From the Bus Setup window, select the Select tab and the RS-232 Serial bus type.

To use

■

Scroll through the Bus list and select the RS-232 bus to configure.

■

Click the Bit Rate box and select the bit rate from the drop-down list.

Bus setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 143

Tektronix MSO73304DX Printable Help

Other manuals for Tektronix MSO73304DX