Waveform acquisition
Signal connection
This diagram displays the signal connection model for each input channel.
What do you want to do next?
Learn more about coupling.
Learn more about the vertical acquisition system.
Probes and signal connection
Select the probe or cable that brings the signal into the instrument. Choose the probe or cable that best fits your acquisition task,
whether it is connecting an active probe to test a digital circuit, or connecting to a test fixture through BNC cables to characterize
a device. The connection to the instrument depends on your application.
Up to four acquisition channels are available. You can display each channel as a waveform or use the channel data to create
other waveforms, such as math and reference waveforms.
Tektronix provides a variety of probes and cables for this product. You can also check your Tektronix catalog for connection
accessories to support your probing requirements.
For more information about a particular probe, read the documentation that came with that probe.
What do you want to do next?
Get a list of compatible probes.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 651
To Next Page
Loading...
Need help?
General
