190 RemotEye 4 User Manual – 90988-007
E.2 BACNET BINARY INPUT POINT MAPPING FOR G9000/G2020
ALL – BACnet Object: Binary Input BACnet Property: Present Value Out of Service: FALSE
Access: Read Only Status Flags: Normal
G9000/G2020 BACnet Binary Input Point Mapping
Object Name & Description
0 = Link Up; 1 = Link Down
0 = Link Up; 1 = Link Down
UPS Battery Status Unknown
UPS Battery Status Normal
UPS Battery Status Depleted
UPS Battery Status Discharging
0 = no Alarm; 1 = Alarm Triggered (upsAlarmEMDSensor1AlarmTriggered)
0 = no Alarm; 1 = Alarm Triggered (upsAlarmEMDSensor2AlarmTriggered)
1 = One or more fault reported, see below for cause; 0 = No Faults
Output Undervoltage Fault
Battery Voltage Abnormal Fault
Inverter Overcurrent Fault
Low Battery Level Reached Warning