Toshiba RemotEye 4 User Manual

38 RemotEye 4 User Manual – 90988-007
 IPv6 Prefix Length: Enter “IPv6 Prefix Length” – Display default IPv6 prefix length, or the assigned
IPv6 Prefix Length from BOOTP/DHCP server or from the console settings setup. (Default: 64)
 BootP/DHCP Control: Select to Disable/Enable “BootP/DHCP Control” protocol.
o Default: Disabled if no BOOTP/DHCP server was found in the network. If BOOTP/DHCP
server is found in network show enabled.
 Telnet Control: Select to Disable/Enable “Telnet Control’ protocol.
(Default: Disabled)
 SSHv2 Control: Select to Disable/Enable “SSHv2 Control” protocol.
(Default: Enabled)
Press Finish.
Figure 5-4 First Time Setup Screen

Toshiba RemotEye 4 Specifications

General

Brand	Toshiba
Model	RemotEye 4
Category	Network Card
Language	English